3ms 983-32-3

3M 983-32-3X50 Diamond Grade™ Conspicuity Marking Tape 50 yd Lx 3 in W 0.014 - 0.018 in Red/White Synthetic Resin

Available from Manufacturer
Manufacturer #:983-32-3x50


3M™ Diamond Grade™ Conspicuity Markings Series 983 and 3M™ Flexible Prismatic Conspicuity Markings Series 963 are highly reflective and are pre-coated with an aggressive pressure sensitive adhesive for application to most clean, dry, wax-free, non-corroded, weather resistant surfaces. The adhesive is protected by an easy-release liner. 3M™ conspicuity markings are intended to be applied to the side and rear perimeter of vehicles in a continuous stripe to enhance visibility and recognition by motorists. Markings can be applied to flat surfaces (with and without rivets) and non-compound curved surfaces with a radius greater than 5 inches. For application to corrugated vehicles, apply the marking to the bottom and top rails or between corrugations if adequate flat surface is available. Application is not recommended to rusted or corroded metal, loose or chalking paint, irregular shaped framework, bolts, rivets larger than 1/2 inch high, support plates, corrugations within 1/8 inch of door hinges, exterior posts, weld joints, the end of the vehicle surface or within 3 inches of mandated lights, reflectors or turn signals.


Length 50 yd Item Name Conspicuity Marking Tape
Brand Name 3M Width 3 in
Sub Brand Diamond Grade™ Color Red/White
Thickness 0.014 - 0.018 in Backing Material Synthetic Resin
Series 983 Packaging Quantity 1 Roll/Case
Standards DOT C2, FMVSS 108, NHTSA Compliant Application For Buses, Caravans, Emergency Vehicles, Tankers, Trailers, Trucks, Trucks and Trailers, Sides and Rear