close
ESA 08Z67
ESAB CANADA 08Z67 CUTTING TIP 1502 1/4IN-ACETYLENE
Available for Backorder
Manufacturer:ESAB CANADA
Manufacturer #:08Z67
Description
General Purpose. Medium Preheat, sufficient preheat for cutting dirty plate and for beveling. Hard drawn, electrolytic, tough pitch copper used in one-piece nozzles - withstands heat and wear - outlasts any copper alloy nozzle. One-piece nozzle has triple
Specifications
Marketing Description | General Purpose. Medium Preheat, sufficient preheat for cutting dirty plate and for beveling. Hard drawn, electrolytic, tough pitch copper used in one-piece nozzles - withstands heat and wear - outlasts any copper alloy nozzle. One-piece nozzle has triple swaged interior - gas passages are mirror smooth with internal angles rounded for non-turbulent, more efficient gas flow - clean, smooth cuts with minimal kerf. Preheat ports are closely spaced around cutting orifice for greater concentration of preheat flames. Hard drawn, electrolytic, tough pitch copper used in one-piece nozzles - withstands heat and wear - outlasts any copper alloy nozzle. One-piece nozzle has triple swaged interior - gas passages are mirror smooth with internal angles rounded for non-turbulent, more efficient gas flow - clean, smooth cuts with minimal kerf. Preheat ports are closely spaced around cutting orifice for greater concentration of preheat flames. Long, parallel preheat passages - permit re-dressing nozzle without affecting performance. One-piece nozzle is a single piece of solid copper - provides maximum cooling - recommended always for acetylene and for other fuel gases when heat exposure is unusually severe. Two-piece nozzles - recommended for high efficiency with fuel gases other than acetylene - solid copper, heavy-wall external sleeve and brass internal sections can be ordered separately to minimize replacement cost. Conical seats - instant aligning provides tight seal, prevents leaks around nozzle nut. | Product Type | 10 |
UNSPSC | 23270000 |
Packages
EA - 1 EA PER EA