dev 10760

ITW PERFORMANCE POLYMERS 10760 Epoxy Adhesive Kit 2-Part 16 hr Cure 1 lb Can Gray/Off-White

In Stock
Manufacturer:ITW PERFORMANCE POLYMERS
Manufacturer #:10760

Description

Titanium putty is high-performance, non-rusting titanium-reinforced epoxy engineered for making repairs to machinery and equipment that can be precision machined. Withstands heavy loads in hard chemical environments. Excellent temperature resistance (350 °F). High compressive strength. Resistance to chemicals and most acids, bases, solvents and alkalis.

Specifications

Specific Gravity 2.5 (Part A), 1.78 (Part B) Item Name Epoxy Adhesive Kit
Boiling Point > 500 °F (Part A), > 350 °F (Part B) Brand Name Devcon
Cure Time 16 hr Tensile Strength 2000 lb/in²
Form Liquid (Part A), Paste (Part B) Application For Restore Bearing Housings and Scored Shafts, Rebuild Wear Rings, Hydraulic Rams and Valves, Repair Equipment and Parts that Require a Machined Finish
Base Content Acids, Solvents and Alkalis Composition 1 - 10% Silicon, Crystalline Silica, 40 - 50% Iron, 20 - 30% Bisphenol A Diglycidyl Ether Resin, 1 - 10% Titanium, Amorphous Silicon Dioxide, Aluminum Flake (Part A), 1 - 10% Phenol, Glass Oxide, 2-Ethyl-4-Methylimidazole, Silicon, Amorphous Silicon Dioxide, Triethylenetetramine, Titanium Dioxide, Titanium, 20 - 30% Formaldehyde Polymer with Phenol and TETA, Iron, 10 - 20% Crystalline Silica (Part B)
Type 2-Part Temperature Rating 150 °F Wet, 350 °F Dry
Color Gray/Off-White Dielectric Strength 56 V/mil
Odor Slight (Part A), Mild Ammonia Like (Part B) Includes Resin, Hardener
Mixing Ratio 3.1:1 Vapor Density >1 (Part A)
Evaporation Rate < 1 Vapor Pressure 0.03 mm Hg at 171 °F (Part A), <10.4 mm Hg at 70 °F (Part B)
VOC 0 g/l Flash Point > 400 °F (Part A), 277 °F (Part B)
Container Type Part A Can Container Size Part A 1 lb
Standards Mil Spec MIL-PRF-24176C, Type I

Packages

EA - 1 EA PER EA CA - 6 EA/CA