dev 10110

ITW PERFORMANCE POLYMERS 10110 Plastic Steel® Epoxy Adhesive Kit 2-Part 16 hr Cure 1 lb Can Dark Gray (Part A), White (Part B)

In Stock
Price $83.26 / EA
Qty EA
Manufacturer:ITW PERFORMANCE POLYMERS
Manufacturer #:10110

Description

PLASTIC STEEL® is the original metal-filled epoxy putty (A) used for hundreds of routine maintenance, production, and tooling applications. Patch and repair areas where welding or brazing would be undesirable or impossible. Bonds to most metals, concrete and some plastics. Cures at room temperature and forms a tough durable metallic mass that can be drilled, tapped, machined or painted. Excellent resistance to oil, gasoline, water and many chemicals.

Specifications

Brand Name Devcon Sub Brand Plastic Steel®
Item Name Epoxy Adhesive Kit Type 2-Part
Container Size Part A 1 lb Container Type Part A Can
Form Paste Cure Time 16 hr
Mixing Ratio 2.5:1 Color Dark Gray (Part A), White (Part B)
Base Content Acids, Solvents and Alkalis Composition 50 - 60% Iron, 1 - 10% Titanium, Organophillic Clay, Aluminum Flake, 20 - 30% Bisphenol A Diglycidyl Ether Resin, 10 - 20% Silicon (Part A), 5 - 15% Synthetic Amorphous Silica, 40 - 50% Aliphatic Amines, 15 - 25% Triethylenetetramine, Benzyl Alcohol, 0.5 - 1.0% Titanium Dioxide, <0.1% Amorphous Silica, Aluminum Trihydrate (Part B)
Dielectric Strength 1181 V/mil Evaporation Rate < 1
Odor Slight (Part A), Mild Ammonia Like (Part B) Specific Gravity 2.8 (Part A), 0.98 (Part B)
Tensile Strength 2385 lb/in² Vapor Density >1
Vapor Pressure 0.03 mm Hg at 171 °F (Part A), <10 mm Hg at 70 °F (Part B) VOC 0 g/l
Flash Point > 400 °F (Part A), > 200 °F (Part B) Boiling Point > 500 °F (Part A), > 450 °F (Part B)
Temperature Rating 120 °F Wet, 250 °F Dry Includes Resin, Hardener
Standards Mil Spec MIL-PRF-24176C, Type I Application For Hundreds of Routine Maintenance, Production and Tooling Applications

Packages

EA - 1 EA PER EA CA - 6 EA/CA
This website uses cookies to ensure you get the best experience on our website. Read more
Ok